RAMShopSite

  • Oprema i alati za autogeno rezanje i zavarivanje
  • Zaštitna oprema, odjeća i obuća za autogeno rezanje i zavarivanje
Ram Rijeka Cebora Kemmpi Strojopromet

Pozicioneri

FILTER PROIZVODA

Po cijeni (HRK)

SPS Okretni pozicioner za zavarivanje

Okretni pozicioner za zavarivanje, nosivosti od 30 do 200 kg. Ručno podesivi nagib; okretanje pomoću električnog motora na struju sa podešavajućom brzinom kretanja.

SP Okretni pozicioneri za zavarivanje

Turntable type positioners for maximum load from 300 to 8000 Kg. Slewing by AC motor with inverter (I) through worm and wheel gearbox and ball slewing ring.

SPC Turntable welding positioners with titling frame

Turntable welding positioners with tilting frame and pneumatically operated tail stock. Manual tilt. Table driven by AC motor with inverter (I) and gearbox.

STL Welding lathes

Welding lathes for 500 to 4000 mm length and diameter from 100 to 900 mm. Steel frame and tracks. Pneumatically operated tail stock.

SBR Longitudinal seam welding positioners

Longitudinal seam welding positioners; models from 500 to 3000 m of welding length. Support pipe incorporating copper alloy back-up bar available with gas inlet holes and water cooled.

SCAR Modular travel carriages for seam welding

Modular travel carriages for seam welding in three versions: Mig, Tig and submerged arc. Steel beam with machined tracks.

SMB Column and boom positioners

Column and boom positioners with horizontal sliding boom (fixed boom on request); the base can be either fixed or poxered and travelling on rails.

SR Roller positioners

Roller positioners for loads from 1600 to 33000 Kg and diameter between 300 and 5000 mm; Roller drive with AC electric motor with inverter (I) and gearbox.

POB Orbital positioners

Orbital positioner to weld joints on a hydraulic cylinder. The welding torch is able to follow the profile section of the joint by means of a mechanical sensor positioned on the top edge of the machine.

POWER66
  • Već od 9.567,25 HRK~1.285,92 EUR

Okretni pozicioner; maksimalna nosivost 100 Kg. Okretanje pomoću električnog motora; - ručno naginjanje...

POWER SR1200

Pozicioner sa valjcima nosivosti 1200 kg, za cijevi promjera između 20 i 800 mm. Pokretanje pomoću električnog motora i reduktora.

POWER SR3500 B

Roller positioner for 3500 kg load and diameters between 9 and 1400 mm. Roller drive with AC electric motor with inverter and gearbox.

POWER SR5000

Roller positioner for 5000 kg load and diameters between 50 and 3000 mm. Roller drive with AC electric motor with inverter and gearbox.

Ram Rijeka Cebora Kemmpi Strojopromet
Zavarivanje

Proizvod (kom: ) je dodan u košaricu.